LG LD-2040WH Service Manual

Before servicing the unit, please read this LG LD-2040WH Service Manual carefully for safety and correct services. This LG LD-2040WH Service Manual information is intended for individuals possessing adequate backgrounds of electrical, electronic and mechanical experience. Any attempt to repair this appliance may result in personal injury and property damage. The manufacturer or seller can not be responsible for the interpretation of this information, nor can it assume any liability in connection with its use. Before disassembling the dishwasher, Remove the plug from electric outlet to avoid electric shock. Close the Water Tap(faucet). Remove all dishes and items in the dishwasher. Remove the Lower Rack and the Upper Rack. In case of the water softner assembly model, open the water softner cap to flow out the water to sump and drain to avoid the floor wet. If necessary, remove the inlet hose and drain hose to avoid the hose damages. Prepare some towels to avoid floor wet by the water left in the dishwasher.

For personal safety, remove house fuse or open circuit breaker before installation. Do not use an extension cord or adapter plug with this appliance. Electrical and grounding connections must comply with the national electrical code/provincial and municipal code and/or other local codes. This appliance must be supplied with correct rating voltage and hertz as shown on instruction manual, and connected to an individual, properly grounded branch circuit, protected by minimum 15 amp circuit breaker or time delay fuse. Wiring must be 2 wires with ground. The power point must be in a accessible location adjacent to and not behind the dishwasher and within 1.2 meters of the dishwasher side. A correctly rated, wired and earthed extension cord may be used if necessary. (See Fig. A). The power point must be correctly earthed, if in doubt, have it checked by a qualified Electrician. No other appliance shall be connected to the same plug outlet by a double adapter or similar plug.

Before sliding the dishwasher into the cupboard opening, all necessary final height adjustment and balancing adjustment should be done using the spanner. Slide the dishwasher into the cabinet opening carefully. Make sure that the drain hose inside the cabinet should not be kinked or exceeded. Before sliding the dishwasher into the cupboard opening, all necessary final height adjustment and balancing adjustment should be done using the spanner. 2. Slide the dishwasher into the cabinet opening carefully. Make sure that the drain hose inside the cabinet should not be kinked or exceeded.

LG LD-2040WH Service Manual tables of content : caution, specifications, features and technical explanation, parts name, wiring diagram, program chart (schematic diagram), how to disassemble, troubleshooting methods, installation instruction, exploded view, replacement part list

Download LG LD-2040WH Service Manual here

Tweet