Please read these Panasonic 8016P Service Manual Instructions completely BEFORE installing any optional accessories. Installing the additional board, or connector with the power ON (only the power switch OFF) could damage the SPC, and/or SC board. If the Hard Disk Drive Unit is installed, to prevent a Disk Scan Function from being performed (similar to when the power is abruptly interrupted to the PC), it is important to follow the step sequence below when turning OFF the Power Switch on the machine. This service information is designed for experienced repair technicians only and is not intended for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or products dealt within this service information by anyone else could result in serious injury or death.
To prevent severe injury and loss of life, read this section carefully before servicing the Panasonic machine to ensure proper, and safe operation of your machine. These symbols are used to alert operators to a specific operating procedure that must not be performed. These symbols are used to alert operators to a specific operating procedure that must be emphasized in order to operate the machine safely. Preventive maintenance is performed at specific intervals, and consists of machine cleaning, and parts replacement. It is essential to perform these service activities properly, and at the specified intervals for customer satisfaction. The purpose of this service is to maintain machine performance, and image quality. You should prepare the replacement parts, and cleaning tools beforehand. After completing the preventive maintenance, discard the used parts, and packaging in accordance with local regulations, and clean the surrounding area. Before servicing the equipment, turn the power switches Off, and disconnect the power cord from the wall outlet. Before using solvents such as IPA (Isopropyl alcohol), put on rubber gloves, and wear eye protection.
Perform the preventive maintenance in accordance with the Preventive Maintenance Check List (refer to 3.4) in the Panasonic 8016P Service Manual. Rollers should be cleaned with water, and a soft cloth. Use the IPA (Isopropyl Alcohol) sparingly. Turn the Power Switch on the Right Side of the machine to the OFF position, and then unplug the AC Power Cord from the wall outlet before disassembling the machine. (During a Lightning Storm, to prevent electrocution disconnect the Telephone Line Cable first before unplugging the AC Power Cord.). After taking the unit apart, do not attempt to operate the machine. When operating the machine with covers removed, be careful, and avoid clothing from being caught by moving components. When handling the drum, follow the precautions listed in se ction 3.3. Ensure to use correct screws. Use toothed lock washers for the installation of ground wires to ensure electrical continuity. To reassemble, reverse the sequence of disassembly, unless otherwise specified. Blown fuses should only be replaced with fuses of the same specified rating.
Download Panasonic 8016P Service Manual here
0 Response to "Panasonic 8016P Service Manual"
Post a Comment