These Canon iR8500/iR7200 service manual operating instructions contain basic facts and figures about the Canon iR8500/iR7200 series and the side paper deck, which was designed as an option for the Copier, the information for the maintenance of the machine in the field to ensure the quality of the product. For the DADF and more options available separate service manuals available, see the corresponding operating instructions. The contents of this service manual may vary for product improvements, and important changes be communicated in the form of service information bulletins. It is expected that all service people are familiar with the content of this service manual and the service information bulletins and equip themselves with the ability to isolate faults in the machine and correct.
Instructions to turn off the main switch. Make sure that you turn off the main switch and disconnect the power supply before carrying out the disassembly. Note also the following. If you turn off the main power switch while the printer function is used, the processed data can be lost. Check that the operation or the memory lamp on the control panel is switched off before you press the main switch. Do not turn the main switch during the download, otherwise the device may no longer work. If the heater switch is turned on, remains switched on, the cartridge heater and the heater even if the main switch is switched off. Make sure that some components remain switched on, even when the front cover is open, as long as the power switch is turned on. Safety of laser light. Laser light can be as harmful for the human body. The laser system of the machine is sealed within a protective housing and external covers to prevent leakage of laser light to the outside, which ensures the safety of the user as long as the machine is used for their intended functions.
Disassembly and reassembly Canon iR8500/iR7200. The mechanical characteristics of the machine are described herein; Taken apart and assembled the machine as required and with the following in mind. Before performing any disassembly and Assembly work, turn off the main switch and disconnect the power supply. If not otherwise specifically instructed, you mount the machine by reversing the disassembly steps. Identify the screws by type and location. One of the fixing screws of the rear cover with a pulley is equipped to protect against static charges. Be sure not to leave the washer when reassembling the machine. Operate the machine usually with parts. Off push of the duplex unit or attachment Assembly make sure the front lid switch or the power button switch off.
Table of contents Canon iR8500 Service Manual
Introduction
New function
Main controller
Installation
Maintenance and inspection
Troubleshooting
Appendix
Service mode
Error code
Download Canon iR8500 Service Manual here
0 Response to "Canon iR8500 Service Manual"
Post a Comment