Download Toshiba 1550 Service Manual PDF is the primary document used for repairing, troubleshooting, disassembly, reassembly. This Toshiba 1550 Service Manual describes specifications, accessories, options and supplies, symbol and function of electrical parts, wire harness location diagram, removing covers and electrical parts, copying process, copier operation, fault detection, flowcharts, display unit, explanation of functions, optical system, feeder unit, drum related section, developer unit, cleaner unit (shares part of the process unit), fuser and paper exit section, optional paper feeding unit, power stabilizing circuit (AC unit), electrical circuit diagram, PC board assembly, harness connection diagram, unpacking procedure.
General precautions regarding the installation and the service of the Toshiba 1550, Transport/install Copier, using two people, be sure to use the positions as shown below. The copier is quite heavy and weighs approximately 35 kg (76.8 lb), therefore pay close attention when handling. Be sure to use a dedicated outlet with an AC 115V / 15A (220V, 240V / 10A) or more for their power supply. The copier must be grounded for safety reasons. It never connects ground to a pipe of gas or a water pipe. Select a suitable location for the installation. Avoid excessive heat, high humidity, dust, vibrations and direct sunlight. To ensure a suitable work for the operation of copying, maintain a minimum clearance of 80 cm (31.5 "") left, 80 cm (31.5 ") to the right and 10 cm (3.9" ") on the back. Be sure to use a dedicated outlet with an AC 115V / 15A (220V, 240V / 10A) or more for their power supply. The copier must be grounded for safety reasons. It never connects ground to a pipe of gas or a water pipe. Select a suitable location for the installation. Avoid excessive heat, high humidity, dust, vibrations and direct sunlight. To ensure a suitable work for the operation of copying, maintain a minimum clearance of 80 cm (31.5 "") left, 80 cm (31.5 ") to the right and 10 cm (3.9" ") on the back.
Basically, be sure to turn off the main switch and disconnect the power cable during the service. Make sure not to touch sections of the high-temperature exposure lamp, the fusing unit, wet heater and its periphery. Be sure to not touch high voltage sections, such as boots and high voltage transformer. Be sure not to touch the rotating sections/operation, such as gears, belts, pulleys, etc. When servicing the machines the main switch is on, make sure not to touch living sections, such as the terminal of the lamp, etc. Use instruments and measurement tools appropriate.
Download Toshiba 1550 Service Manual here
0 Response to "Toshiba 1550 Service Manual"
Post a Comment